| 전자부품 데이터시트 검색엔진 |
|
MCP2200T-I/SS 데이터시트(PDF) 22 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP2200T-I/SS 데이터시트(HTML) 22 Page - Microchip Technology |
|
22 / 44 page ![]() MCP2200 DS20002228C-page 22 2011-2015 Microchip Technology Inc. 2.3.1.23 SetPin Function: bool SimpleIOClass::SetPin(unsigned int pin) EXAMPLE 2-23: 2.3.1.24 WriteEEPROM Function: int SimpleIOClass::WriteEEPROM(unsigned int uiEEPAddress, unsigned char ucValue) EXAMPLE 2-24: Summary: Sets the specified pin. Description: Sets the specified pin to logic ‘1’. Precondition: Must be previously configured as an output via a ConfigureIO or ConfigureIoDefaultOutput call. VID and PID must be previously set via a call to InitMCP2200(VID, PID). Parameters: pin - the pin number to set (0-7) Returns: This function returns True if the transmission is successful and returns False if the transmission fails. Remarks: None. Summary: Writes a byte into the MCP2200 device’s EEPROM. Description: Writes a byte at the given address into the internal 256 bytes EEPROM. Precondition: At least one call to the InitMCP2200() is required in order to initiate a DLL search for the compatible devices. VID and PID must be previously set via a call to InitMCP2200(VID, PID). Parameters: • uiEEPAddress - the EEPROM address location to write to (must be from 0 to 255 inclusively). • ucValue - the byte value required for writing to the given location. Returns: This function returns ‘0’ if the write command was successfully sent to the device, otherwise it returns: • E_WRONG_ADDRESS (-3) in case the given EEPROM address is out of range • E_CANNOT_SEND_DATA (-4) in case the function cannot send the command to the device. Remarks: The function will send the write EEPROM command, but has no confirmation whether the EEPROM location was actually written. In order to verify the correctness of the EEPROM write, the user can issue a SimpleIOClass::ReadEEPROM() and check if the returned value matches the written one. if (SimpleIOClass::SetPin (2)) { lblStatusBar->Text = “Success”; } else lblStatusBar->Text = “Invalid command ” + SimpleIOClass::LastError; int iRetValue = SimpleIOClass::WriteEEPROM(0x01, 0xAB); if (iRetValue == 0) { lblStatusBar->Text = “Success”; } else lblStatusBar->Text = “Error writting to EEPROM” + SimpleIOClass::LastError; |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |