UCS1002-2 datasheet(71/114 Pages) MICROCHIP

71 / 114 page

Programmable USB Port Power Controller with Charger Emulation

Datasheet

SMSC UCS1002

Revision 1.4 (07-16-13)

DATASHEET

During power-on reset (POR), the default values are stored in the registers. A POR is initiated when

power is first applied to the part and the voltage on the VDD supply surpasses the VDD_TH level as

specified in the electrical characteristics. Any reads to undefined registers will return 00h. Writes to

undefined registers will not have an effect.

When a bit is “set”, this means that the user writes a logic ‘1’ to it. When a bit is “cleared”, this means

that the user writes a logic ‘0’ to it.

10.1

Current Measurement Register

The Current Measurement register stores the measured current value delivered to the portable device

(IBUS). This value is updated continuously while the device is in the Active power state. The bit weights

are in mA and the range is from 9.76 mA to 2.5 A.

This data will be cleared when the device enters the Sleep or Detect states. This data will also be

cleared whenever the port power switch is turned off (including during emulation or any time that VBUS

is discharged).

4Ah

R/W

Custom Stimulus /

Response Pair 3 -

Config 2

Sets the response and magnitude

for stimulus 3

00h

Page 99

4Bh

R/W

Custom Stimulus /

Response Pair 3 -

Config 3

Sets the threshold and pull-up /

pull-down settings for stimulus 3

00h

Page 99

4Ch

R/W

Custom Stimulus /

Response Pair 3 -

Config 4

Sets the resistor ratio for stimulus

00h

Page 99

50h

Applied Current

Limiting Behavior

Indicates the applied current

limiting behavior

82h

Page 102

51h

R/W

Custom Current

Limiting Behavior

Config

Controls the custom current

limiting behavior

82h

Page 102

FDh

Product ID

Stores a fixed value that identifies

each product

4Eh

Page 103

FEh

Manufacturer ID

Stores a fixed value that identifies

SMSC

5Dh

Page 104

FFh

Revision

Stores a fixed value that

represents the revision number

82h

Page 104

Table 10.2 Current Measurement Register

ADDR

R/W

DEFAULT

00h

Current

Measurement

1249.3

624.6

312.3

156.2

78.1

39.0

19.5

9.76

00h

Table 10.1 Register Set in Hexadecimal Order (continued)

ADDRESS

R/W

FUNCTION

DEFAULT

VALUE

PAGE

UCS1002-2 데이터시트(PDF) 71 Page - Microchip Technology

UCS1002-2 데이터시트(HTML) 71 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL