LAN89730 datasheet(155/218 Pages) MICROCHIP

155 / 218 page

 2013-2015 Microchip Technology Inc.

DS60001348A-page 155

LAN89730

6.3.27

HS DESCRIPTOR ATTRIBUTES REGISTER (HS_ATTR)

This register sets the length values for HS descriptors that have been loaded into Descriptor RAM via the Data Port

registers. The HS Polling interval is also defined by a field within this register. The Descriptor RAM images may be used,

in conjunction with this register, to facilitate customized operation when no EEPROM is present.

Note 6-10

The only legal values are 0 and 0x12h. Writing any other values will result in untoward behavior and

unexpected results.

Address:

0A0h

Size:

32 bits

Note:

If a descriptor does not exist in Descriptor RAM, its size value must be written as 00h.

Note:

This register only affects system operation when an EEPROM is not present and the EEPROM Emulation

Enable (EEM) bit indicates Descriptor RAM and the Attributes registers are to be used for descriptor pro-

cessing.

Note:

Writing to this register when an EEPROM is present is prohibited and will result in untoward operation and

unexpected results.

Note:

This register is protected by Reset Protection (RST_PROTECT).

Bits

Description

Type

Default

31:24

RESERVED

23:16

HS Polling Interval (HS_POLL_INT)

R/W

04h

15:8

HS Device Descriptor Size (HS_DEV_DESC_SIZE)

Note 6-10

R/W

00h

7:0

HS Configuration Descriptor Size (HS_CFG_DESC_SIZE)

Note 6-10

R/W

00h

LAN89730 데이터시트(PDF) 155 Page - Microchip Technology

LAN89730 데이터시트(HTML) 155 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL