L9658 datasheet(55/64 Pages) STMICROELECTRONICS

55 / 64 page

L9658

Functional description

Doc ID 14219 Rev 3

55/64

Bits[2:0]

These bits program the threshold for the current demodulation affecting each individual

channel. The current ranges supported are given inTable 36.

All incoming satellite signals are processed through deglitch filter before reaching the

decoder. D3 enables a hysteresis around the current threshold for added noise immunity.

Bits[5:4]

These bits are used to enable the satellite channels and the internal decoders to be

commanded on or off according to following table. Suggested sequence to avoid spurious

error code inside FIFO is to switch on the channel first, and enable decoder only once

satellite is powered.

Bits[7:6]

These bits are used to configure the number of bits in the "B" protocol data field. For these

bits to execute on any given channel, the channel has to be configured for "B" protocol

through bits <11:8> in the MCR register.

Current Trip Point threshold (refer to Table 36)

Table 36.

Current ranges supported are given in following table

Bit D2

Bit D1

Bit D0

Current Threshold (mA)

16.50(default)

19.00

22.50

26.50

32.00

39.00

48.50

60.00

Table 37.

Satellite/decoder control

Bit D5

Bit D4

Definition

Satellite

Decoder

OFF (default)

OFF

Table 35.

Channel configuration register definition

Bit

State

Description

L9658 데이터시트(PDF) 55 Page - STMicroelectronics

L9658 데이터시트(HTML) 55 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

데이터시트 다운로드

링크 URL