| 전자부품 데이터시트 검색엔진 |
|
DM505LRBABF 데이터시트(PDF) 80 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
DM505LRBABF 데이터시트(HTML) 80 Page - Texas Instruments |
|
80 / 290 page ![]() 80 DM505 SPRS976D – NOVEMBER 2016 – REVISED JULY 2017 www.ti.com Submit Documentation Feedback Specifications Copyright © 2016–2017, Texas Instruments Incorporated over operating free-air temperature range (unless otherwise noted) PARAMETER DESCRIPTION MIN (2) NOM MAX DC (3) MAX (2) UNIT vddshv1 Dual Voltage (1.8V or 3.3V) power supply for the GENERAL Power Group pins 1.8-V Mode 1.71 1.80 1.836 1.89 V 3.3-V Mode 3.135 3.30 3.366 3.465 Maximum noise (peak- peak) 1.8-V Mode 50 mVPPmax 3.3-V Mode vddshv2 Dual Voltage (1.8V or 3.3V) power supply for the GPMC Power Group pins 1.8-V Mode 1.71 1.80 1.836 1.89 V 3.3-V Mode 3.135 3.30 3.366 3.465 Maximum noise (peak- peak) 1.8-V Mode 50 mVPPmax 3.3-V Mode vddshv3 Dual Voltage (1.8V or 3.3V) power supply for the UART1 and UART2 Power Group pins 1.8-V Mode 1.71 1.80 1.836 1.89 V 3.3-V Mode 3.135 3.30 3.366 3.465 Maximum noise (peak- peak) 1.8-V Mode 50 mVPPmax 3.3-V Mode vddshv4 Dual Voltage (1.8V or 3.3V) power supply for the RGMII Power Group pins 1.8-V Mode 1.71 1.80 1.836 1.89 V 3.3-V Mode 3.135 3.30 3.366 3.465 Maximum noise (peak- peak) 1.8-V Mode 50 mVPPmax 3.3-V Mode vddshv5 Dual Voltage (1.8V or 3.3V) power supply for the VIN1 Power Group pins 1.8-V Mode 1.71 1.80 1.836 1.89 V 3.3-V Mode 3.135 3.30 3.366 3.465 Maximum noise (peak- peak) 1.8-V Mode 50 mVPPmax 3.3-V Mode vddshv6 Dual Voltage (1.8V or 3.3V) power supply for the VOUT1 Power Group pins 1.8-V Mode 1.71 1.80 1.836 1.89 V 3.3-V Mode 3.135 3.30 3.366 3.465 Maximum noise (peak- peak) 1.8-V Mode 50 mVPPmax 3.3-V Mode vss Ground supply 0 V vssa_osc0 OSC0 analog ground 0 V vssa_osc1 OSC1 analog ground 0 V vssa_csi CSI analog ground supply 0 V vssa_dac DAC analog ground supply 0 V vssa_adc ADC analog ground supply 0 V TJ (1) Operating junction temperature range Automotive -40 125 °C (1) Refer to Power on Hours table for limitations. (2) The voltage at the device ball should never be below the MIN voltage or above the MAX voltage for any amount of time. This requirement includes dynamic voltage events such as AC ripple, voltage transients, voltage dips, etc. (3) The DC voltage at the device ball should never be above the MAX DC voltage to avoid impact on device reliability and lifetime POH (Power-On-Hours). The MAX DC voltage is defined as the highest allowed DC regulated voltage, without transients, seen at the ball. (4) Logic functions and parameter values are not assured out of the range specified in the recommended operating conditions. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |