ML9092-01TB datasheet(17/66 Pages) OKI

17 / 66 page

FEDL9092-01

OKI Semiconductor

ML9092-01/02/03/04

17/66

• V

S1–

Negative connection pin for the capacitor for the voltage doubler. Connect a 4.7

µF (±30%) capacitor between this

pin and the VC1+ pin. When the voltage doubler is not used, leave this pin unconnected (open).

This pin is provided for the ML9092-01/02.

• V

C1+

Positive connection pin for the capacitor for the voltage doubler. Connect a 4.7

µF (±30%) capacitor between this

pin and the VS1– pin. When the voltage doubler is not used, leave this pin unconnected (open).

This pin is provided for the ML9092-01/02.

• V

OUT

A voltage twice that which is input to the VIN pin is output to this pin. Connect a 4.7 µF capacitor between this pin

and the VSS pin. When the internal voltage doubler is not used, input the specified voltage to this pin from the

outside. When built-in contrast adjustment (electronic volume) is used, leave the connection between this pin and

the V0 pin open. The LCD drive voltage will be output from the V0 pin according to the contrast adjustment value.

When built-in contrast adjustment is not used, connect this pin with the V0 pin.

This pin is provided for the ML9092-01/02.

• V

0, V2

LCD bias pins. A bias dividing resistor is connected to these pins.

These pins are provided for the ML9092-01/02/04.

• V

HIN

LCD drive high voltage power supply connection pin. When built-in contrast adjustment (electronic volume) is

used, input the LCD drive power supply voltage to this pin. The LCD drive voltage will be output from the V0 pin

according to the contrast adjustment value. When built-in contrast adjustment is not used, strap the VHIN pin and

V0 pin outside the IC, and input the LCD drive voltage into both pins.

This pin is provided for the ML9092-03/04.

• V

0, V1, V2, V3

LCD bias pins. A bias dividing resistor is connected to these pins. When using a large-screen LCD, however,

input the LCD bias voltage from outside the IC to these pins.

This is applicable to the ML9092-03.

ML9092-01TB 데이터시트(PDF) 17 Page - OKI electronic componets