| 전자부품 데이터시트 검색엔진 |
|
AXP288D 데이터시트(PDF) 50 Page - Shenzhen X-Powers Technology Co ., Ltd |
|
|
|||||||||||||||||||||||||||||
AXP288D 데이터시트(HTML) 50 Page - Shenzhen X-Powers Technology Co ., Ltd |
|
50 / 110 page ![]() AXP288 PMIC Optimized For Multi-Core High-Performance System AXP288 Datasheet V1.06 Copyright © 2014 X-Powers Limited. All Rights Reserved. 50 9.4.3 Timeout activity Refer to REG 34H, there are 2 timers that can be programmed as charging expire time, REG 34H[7:6] for Pre Charge and REG 34H[1:0] for Fast Charge Mode. When the actual charge current is less than 20% of the ICHRG, the timer will automatically hold. When the timer expired, charger will no longer charge with programmed charging current. Instead, it will turn into safe mode. Under safe mode, charger will always charge the battery with 5mA until VBATSENSE > VTRGT – 0.1V. When the charger exits from safe mode, it will assert the IRQ. The safe mode status is reflected in REG 01H[3] and SOC can get the mode status through this bit. Table 9-29 REG 34H Bit Description R/W Default 7 Pre-charge Timer length setting 1 00: 40 minutes; 01: 50 minutes; 10: 60 minutes; 11: 70 minutes. RW 0 6 Pre-charge Timer length setting 0 RW 1 1 Fast charge maximum time setting 1 00: 6 hours; 01: 8 hours; 10: 10 hours; 11: 12 hours. RW 0 0 Fast charge maximum time setting 0 RW 1 Table 9-30 REG 01H Description R/W Default Bit3 Indicate battery active mode 0-charger is not in battery active mode 1-charger is in battery active mode R There are two ways to reset or exit from safe mode. One is plug out and re-insert the input power source or toggle charger enable bit. 9.4.4 CHGLED activity AXP288 provides CHGLED pin. The LED connected to this pin can be used to indicate charger status and input power sources over voltage alarm. There are two Charge LED modes that can be configured through REG 34H[4] if REG 32H[3] is set to 1. Table 9-31 REG 34H Description R/W Default Bit 4 CHGLED Mode select when REG 32H[3] is 1 0: Type A; 1: Type B RW 0 Table 9-30 REG 32H Description R/W Default Bit 5-4 CHGLED pin control 00: Hi-Z 01: 25% 0.5Hz toggle RW 00 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |