전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

D17133CS 데이터시트(PDF) 82 Page - NEC

부품명 D17133CS
상세설명  4-BIT SINGLE-CHIP MICROCONTROLLER
PDF  289 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  NEC [NEC]
홈페이지  http://www.nec.com/
Logo NEC - NEC

D17133CS 데이터시트(HTML) 82 Page - NEC

Back Button D17133CS Datasheet HTML 78Page - NEC D17133CS Datasheet HTML 79Page - NEC D17133CS Datasheet HTML 80Page - NEC D17133CS Datasheet HTML 81Page - NEC D17133CS Datasheet HTML 82Page - NEC D17133CS Datasheet HTML 83Page - NEC D17133CS Datasheet HTML 84Page - NEC D17133CS Datasheet HTML 85Page - NEC D17133CS Datasheet HTML 86Page - NEC Next Button
Zoom Inzoom in Zoom Outzoom out
 82 / 289 page
background image
CHAPTER 7
SYSTEM REGISTER (SYSREG)
67
7.8.2 Handling of System Register Addresses Fixed at 0
In dealing with system register addresses fixed at 0 (refer to Figure 7-2), there are a few points for which caution
should be taken with regard to device, emulator and assembler operation.
Items (1), (2) and (3) explain these points.
(1) Concerning device operation
Trying to write data to an address fixed at 0 will not change the value (0) at that address. Any attempt to
read an address fixed at 0 will result in the value 0 being read.
(2) When using a 17K series in-circuit emulator (IE-17K or IE-17K-ET)
An error will be generated if a write instruction attempts to write the value 1 to an address fixed at 0.
Below is an example of the type of instructions that will cause the in-circuit emulator to generate an error.
Example 1. MOV
BAMK, #0100B ;
Attempts to write the value 1 to bit 3 (an address fixed at 0).
2. MOV
IXL, #1111B
;
MOV
IXM, #1111B
;
MOV
IXH, #0001B
;
ADD
IXL, #1
;
ADDC
IXM, #0
;
ADDC
IXH, #0
;
However, when all valid bits are set to 1 as shown in Example 2, executing the instructions INC AR or INC IX
will not cause an error to be generated by the in-circuit emulator. This is because when all valid bits of the address
register and index register are set to 1, executing the INC instruction causes all bits to be set to 0.
The only time the in-circuit emulator will not generate an error when an attempt is made to write the value 1 to
a bit fixed at 0 is when the address being written to is in the address register.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com