LPC55S6X datasheet(94/128 Pages) NXP

94 / 128 page

LPC55S6x

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1.9 — 10 February 2020

94 of 128

NXP Semiconductors

LPC55S6x

32-bit ARM Cortex-M33 microcontroller

11.12 USART interface

The actual USART bit rate depends on the delays introduced by the external trace, the

external device, system clock (CCLK), and capacitive loading. Excluding delays

introduced by external device and PCB, the maximum supported bit rate for USART

master and slave synchronous mode is 10 Mbit/s. Excluding delays

introduced by external device and PCB, the maximum supported bit rate for USART

master and slave asynchronous mode is 6.25 Mbit/s.

[1]

Based on simulated values. Not tested in production.

Table 34.

USART dynamic characteristics[1]

Tamb = 40 C to 105 C; VDD = 1.8 V to 3.6 V; CL = 10 pF balanced loading on all pins; Input slew = 1 ns, SLEW setting =

fast-mode for all pins; Parameters sampled at the 50% level of the rising or falling edge.

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

USART master (in synchronous mode)

tsu(D)

data input set-up time

th(D)

data input hold time

tv(Q)

data output valid time

USART slave (in synchronous mode)

tsu(D)

data input set-up time

th(D)

data input hold time

tv(Q)

data output valid time

Fig 19. USART timing

Un_SCLK (CLKPOL = 0)

TXD

RXD

Tcy(clk)

tsu(D) th(D)

tv(Q)

START

BIT0

tvQ)

Un_SCLK (CLKPOL = 1)

START

BIT0

BIT1

aaa-015074

LPC55S6X 데이터시트(PDF) 94 Page - NXP Semiconductors

LPC55S6X 데이터시트(HTML) 94 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL