UPD360 datasheet(52/221 Pages) MICROCHIP

부품명	UPD360

상세설명	Highly Integrated Small Form Factor USB Type-C??Power Delivery 2.0 Port Controller

PDF	221 Pages

Scroll/Zoom	100%

제조업체	MICROCHIP [Microchip Technology]

홈페이지	http://www.microchip.com

Logo

52 / 221 page

UPD360

DS00002084C-page 52

 2016-2017 Microchip Technology Inc.

Buffer Type

When set, the output buffer for the corresponding GPIO signal is configured

as a push/pull driver.

When cleared, the corresponding GPIO signal is configured as an open-drain

driver.

R/W

Direction

0b: Input

1b: Output

R/W

Enable

0b: GPIO Disabled

1b: GPIO Enabled

Note:

When a GPIO is disabled, the default function, if any, will be func-

tional. All GPIOs default to being enabled and configured as inputs.

R/W

Note:

The GPO1 and GPO10 general purpose signals can only function as outputs and must be kept in a

low state coincident with de-asserting RESET_N.

Note:

GPIO0 is not available in the UPD360-C.

Note:

In Standalone DFP/UFP modes (UPD360-A/UPD360-B only), GPIOs 9-15 have alternate dedicated func-

tions, as defined in Section 3.1.1.1, "UPD360-A/UPD360-B GPIO[9:15] Functions in Standalone DFP/UFP

Modes," on page 11

Bits

Description

Type

Default

UPD360 데이터시트(PDF) 52 Page - Microchip Technology