전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

MXT1664T3-C2TESSQTP 데이터시트(PDF) 37 Page - Microchip Technology

부품명 MXT1664T3-C2TESSQTP
상세설명  maXTouch 1664-node Touchscreen Controller
PDF  98 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  MICROCHIP [Microchip Technology]
홈페이지  http://www.microchip.com
Logo MICROCHIP - Microchip Technology

MXT1664T3-C2TESSQTP 데이터시트(HTML) 37 Page - Microchip Technology

Back Button MXT1664T3-C2TESSQTP Datasheet HTML 33Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 34Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 35Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 36Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 37Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 38Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 39Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 40Page - Microchip Technology MXT1664T3-C2TESSQTP Datasheet HTML 41Page - Microchip Technology Next Button
Zoom Inzoom in Zoom Outzoom out
 37 / 98 page
background image
MXT1664T3 2.0
 2018 Microchip Technology Inc.
DS40002054A-page 37
FIGURE 8-5:
CONTINUOUS MESSAGE READ EXAMPLE – I2C CHECKSUM MODE
There are no checksums added on any other I2C reads. An 8-bit CRC can be added, however, to all I2C writes, as
described in Section 8.3 “I2C Writes in Checksum Mode”.
An alternative method of reading messages using the CHG line is given in Section 8.6 “CHG Line”.
8.6
CHG Line
The CHG line is an active-low, open-drain output that is used to alert the host that a new message is available in the
Message Processor T5 object. This provides the host with an interrupt-style interface with the potential for fast response
times. It reduces the need for wasteful I2C communications.
The CHG line should always be configured as an input on the host during normal usage. This is particularly important
after power-up or reset (see Section 5.0 “Power-up / Reset Requirements”).
A pull-up resistor is required to VddIO (see Section 2.0 “Schematics”).
The CHG line operates in two modes when it is used with I2C communications, as defined by the Communications
Configuration T18 object.
Report ID
Data
Data
Checksum
Report ID
Data
Data
Checksum
Start Address of
Message Count Object
Set Address Pointer
Read Message Count
START
SLA+R
Count = 3
Message Count Object
Read Message Data
Message Processor Object – Message # 1
size bytes
Message Processor Object – Message # 2
Message Processor Object – Message # 3
STOP
Continuous
Read
START
SLA+W
LSB
MSB | 0x80
Checksum
STOP
Report ID
Data
Data
Checksum



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com