전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

MPF5024AMBA0ES 데이터시트(PDF) 78 Page - NXP Semiconductors

부품명 MPF5024AMBA0ES
상세설명  Power management integrated circuit (PMIC) for high performance applications
PDF  93 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  NXP [NXP Semiconductors]
홈페이지  http://www.nxp.com
Logo NXP - NXP Semiconductors

MPF5024AMBA0ES 데이터시트(HTML) 78 Page - NXP Semiconductors

Back Button MPF5024AMBA0ES Datasheet HTML 74Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 75Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 76Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 77Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 78Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 79Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 80Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 81Page - NXP Semiconductors MPF5024AMBA0ES Datasheet HTML 82Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 78 / 93 page
background image
NXP Semiconductors
PF5024
Power management integrated circuit (PMIC) for high performance applications
PF5024
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2020. All rights reserved.
Product data sheet
Rev. 1 — 15 April 2020
78 / 93
17.3 Default hardwire configuration
If VDDOTP = V1P5D, the device loads the configuration from the default hardwire
configuration directly into the corresponding I2C functional registers each time the
registers need to be reloaded.
When using the hardwire configuration, the TRIM values are still loaded from the OTP
fuses. In the event of a TRIM loading failure, the corresponding fault flag is set to 1.
When the hardwire configuration is used, the PF5024 does not allow TBB mode
operation. When TBBEN = V1P5D, the device enters a debug mode. In this mode of
operation, the device ignores the default value of the LPM_OFF bit and moves into the
QPU_Off state, regardless of the result of the self-test. However, the actual result of the
self-test is notified by the STEST_NOK flag.
• When the self-test is successful, the STEST_NOK flag is set to 0
• When the self-test has failed, the STEST_NOK flag is set to 1
During hardwire configuration, the OTP_NOK flag is always set to 0.
When any of the TRIM_NOK, OTP_NOK or STEST_NOK flags are set, any PWRUP
event is ignored until the flags are cleared by writing a 0. These flags can only be written
when the system is in the debug mode, (TBBEN = V1P5D). In normal operation, the
TRIM_NOK, OTP_NOK and STEST_NOK flags are read only.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com