12

Certification

The STM32WB5MMG module passed the following certifications:

•

ZigBee (802.15.4-4PHY)

•

BLE (RF_PHY)

•

CE

•

FCC-TCB (USA)

•

ISED-FCB (Canada)

•

JRF (Japan)

•

KC or MSIP (Korea)

•

NCC (Taiwan)

•

ROHS

•

REACH

•

GOST (Russia).

SRRC (China) certification is ongoing.

The following sections detail some of the module certifications from sample regions.

12.1

CE certification

The STM32WB5MMG module has obtained CE certification.

The module is provided with CE marking.

12.2

FCC certification

The STM32WB5MMG module complies with part 15 of the FCC Rules.

The module is labeled with its own FCC ID: YCP-STM32WB5M001

The operation is subject to the following two conditions:

•

This device may not cause harmful interference

•

This device must accept any interference received, including interference that may cause undesired

operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation.

Label requirements

If the identification number is not visible when the module is installed inside another device, then the outside of

the device into which the module is installed must also display a label referring to the enclosed module. This label

must contain FCC ID: YCP-STM32WB5M001

RF radiation exposure statement caution

The module antenna must be installed to meet the RF exposure compliance separation distance of “20 cm” and

any additional testing and authorization processes as required.

STM32WB5MMG

Certification

DS13252 - Rev 1

page 24/31