| 전자부품 데이터시트 검색엔진 |
|
AT90PWM2 데이터시트(PDF) 290 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT90PWM2 데이터시트(HTML) 290 Page - ATMEL Corporation |
|
290 / 365 page ![]() 290 AT90PWM2/3 4317B–AVR–02/05 Notes: 1. See “Alternate Functions of Port C” on page 73 for description of RSTDISBL Fuse. 2. The SPIEN Fuse is not accessible in serial programming mode. 3. See “Watchdog Timer Configuration” on page 54 for details. 4. See Table 15 on page 47 for BODLEVEL Fuse decoding. Note: 1. The default value of SUT1..0 results in maximum start-up time for the default clock source. See Table 10 on page 36 for details. 2. The default setting of CKSEL3..0 results in internal RC Oscillator @ 8 MHz. See Table 10 on page 36 for details. 3. The CKOUT Fuse allows the system clock to be output on PORTB0. See “Clock Out- put Buffer” on page 36 for details. 4. See “System Clock Prescaler” on page 37 for details. The status of the Fuse bits is not affected by Chip Erase. Note that the Fuse bits are locked if Lock bit1 (LB1) is programmed. Program the Fuse bits before programming the Lock bits. Table 121. Fuse High Byte High Fuse Byte Bit No Description Default Value RSTDISBL (1) 7 External Reset Disable 1 (unprogrammed) DWEN 6 debugWIRE Enable 1 (unprogrammed) SPIEN (2) 5 Enable Serial Program and Data Downloading 0 (programmed, SPI programming enabled) WDTON (3) 4 Watchdog Timer Always On 1 (unprogrammed) EESAVE 3 EEPROM memory is preserved through the Chip Erase 1 (unprogrammed), EEPROM not reserved BODLEVEL2 (4) 2 Brown-out Detector trigger level 1 (unprogrammed) BODLEVEL1 (4) 1 Brown-out Detector trigger level 1 (unprogrammed) BODLEVEL0 (4) 0 Brown-out Detector trigger level 1 (unprogrammed) Table 122. Fuse Low Byte Low Fuse Byte Bit No Description Default Value CKDIV8 (4) 7 Divide clock by 8 0 (programmed) CKOUT (3) 6 Clock output 1 (unprogrammed) SUT1 5 Select start-up time 1 (unprogrammed) (1) SUT0 4 Select start-up time 0 (programmed) (1) CKSEL3 3 Select Clock source 0 (programmed) (2) CKSEL2 2 Select Clock source 0 (programmed) (2) CKSEL1 1 Select Clock source 1 (unprogrammed) (2) CKSEL0 0 Select Clock source 0 (programmed) (2) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |