EMC1702 datasheet(44/60 Pages) MICROCHIP

44 / 60 page

EMC1702

DS20006455A



2020 Microchip Technology Inc.

5.18 Averaging Control Register

The Averaging Control Register controls the digital averaging on the external diode channels.

Bits 1-0 - AVG1[1:0] - Controls the digital averaging that is applied to the External Diode 1 temperature

measurements as shown in Table 5.23.

5.19 Voltage Sampling Configuration Register

The Voltage Sampling Configuration register controls functionality for the source voltage measurement

and Peak Detector circuitry.

Bit 7 - PK_ALERT_THERM - Determines whether the ALERT pin or THERM pin is asserted if the Peak

Detector detects a current spike. If configured to assert the ALERT pin, the PEAK_MASK can block

the pin assertion normally. If configured to assert the THERM pin, it will not be masked.



‘0’ - The Peak Detector circuitry will assert the ALERT pin when a current spike is detected. The

ALERT pin must be configured to operate in Comparator mode or it will not be asserted.



‘1’ (default) - The Peak Detector circuitry will assert the THERM pin when a current spike is

detected.

Bits 3 - 2 - V_QUEUE[1:0] - Determine the number of consecutive measurements that VSOURCE must

exceed the limits before flagging an interrupt.

Table 5.22 Filter Configuration Register

ADDR

R/W

DEFAULT

40h

R/W

Filter Control

AVG1[1:0]

00h

Table 5.23 Averaging Settings

AVGX[1:0]

AVERAGING

Disabled (default)

Table 5.24 Voltage Sampling Configuration Register

ADDR

R/W

DEFAULT

50h

R/W

Voltage

Sampling

Config

PK_

ALERT_

THERM

V_QUEUE[1:0]

V_AVG[1:0]

80h

EMC1702 데이터시트(PDF) 44 Page - Microchip Technology

EMC1702 데이터시트(HTML) 44 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

데이터시트 다운로드

링크 URL