Note:

The detection volume of Table 2. FoV angles has been measured with a white 88% reflectance perpendicular

target in full FoV, located at 1 m from the sensor, without ambient light (dark conditions), with an 8x8 resolution

and 14% sharpener (default value), in Continuous mode at 15 Hz.

1.3

Field of illumination

The VCSEL field of illumination (FoI) is shown in the figure below. The relative emitted signal power depends on

the FoI angle, and corresponds to:

•

73.8° x 73.8° considering a beam with 75% signal from maximum

•

80.8° x 80.8° considering a beam with 10% signal from maximum

VL53L7CX

Field of illumination

DS13865 - Rev 3

page 4/40