HC705P6AGRSSLASHD datasheet(41/134 Pages) NXP

부품명	HC705P6AGRS/D

상세설명	The Motorola MC68HC705P6A is an EPROM version of the MC68HC05P6 microcontroller

PDF	134 Pages

Scroll/Zoom	100%

제조업체	NXP [NXP Semiconductors]

홈페이지	http://www.nxp.com

Logo

41 / 134 page

General Release Specification

Internal Resets

MC68HC705P6A — Rev. 1.0

General Release Specification

Resets

voltage range (between VSS–VDD), the COP watchdog timer’s output will

be restored if the COP bit in the MOR is set.

The COP register is shared with the LSB of an unused vector address

as shown in Figure 4-2. Reading this location will return the

programmed value of the unused user interrupt vector, usually zero.

Writing to this location will clear the COP watchdog timer.

When the COP watchdog timer expires, it will generate the RST signal

and reset the MCU. If any other reset function is active at the end of the

COP reset signal, the RST signal will remain in the reset condition until

the other reset condition(s) end. When the reset condition ends, the

MCU’s operating mode will be selected (see Table 3-1).

$1FF0

Bit 7

654321

Bit 0

Read:

00000000

Write:

COPR

= Unimplemented

Figure 4-2. Unused Vector and COP Watchdog Timer

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

HC705P6AGRS/D 데이터시트(PDF) 41 Page - NXP Semiconductors