SN250 datasheet(69/130 Pages) STMICROELECTRONICS

69 / 130 page

SN250

Functional description—application modules

69/130

7.3.1

SPI modes

The SPI mode of the SC2 supports both master and slave modes. It has a fixed word length

of 8 bits. The SC2 SPI controller is enabled with SC2_MODE set to 2.

The SC2 SPI mode has the following features:

●

Master and slave modes

●

Full duplex operation

●

Programmable master mode clock frequency (12MHz max.)

●

Slave mode up to 5MHz bit rate

●

Programmable clock polarity and clock phase

●

Selectable data shift direction (either LSB or MSB first)

●

Optional slave select input

The following signals can be made available on the GPIO pins:

●

MOSI (master out/slave in)

●

MISO (master in/slave out)

●

MSCLK (serial clock)

●

nSSEL (slave select—only in slave mode)

SPI master mode

The SC2 SPI Master controller is enabled with the SC_SPIMST set in the SC2_SPICFG

The SC2 SPI module obtains its reference clock from a programmable clock generator.

Clock rates are set by a clock division ratio from the 24 MHz clock:

EXP is written to the SC2_RATEEXP register and LIN to the SC2_RATELIN register. Since

the range for both values is 0 to 15, the fastest data rate is 12Mbps and the slowest is

22.9bps.

The SC2 SPI Master supports various frame formats depending upon the clock polarity

(SC_SPIPOL), clock phase (SC_SPIPHA), and direction of data (SC_SPIORD) (see

Table 24). The register bits SC_SPIPOL, SC_SPIPHA, and SC_SPIORD are defined within

the SC2_SPICFG register.

Note:

Switching the SPI configuration from SC_SPIPOL=1 to SC_SPIPOL=0 without subsequently

setting SC2_MODE=0 and reinitializing the SPI will cause an extra byte (0xFE) to be

transmitted immediately before the first intended byte.

Rate

24 MHz

2LIN

() 2

EXP

⋅⋅

-------------------------------------------------

SN250 데이터시트(PDF) 69 Page - STMicroelectronics

SN250 데이터시트(HTML) 69 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL