| 전자부품 데이터시트 검색엔진 |
|
PI7C8150AND 데이터시트(PDF) 57 Page - Pericom Semiconductor Corporation |
|
|
|||||||||||||||||||||||||||||
PI7C8150AND 데이터시트(HTML) 57 Page - Pericom Semiconductor Corporation |
|
57 / 111 page ![]() PI7C8150A 2-PORT PCI-TO-PCI BRIDGE Page 57 of 111 APRIL 2006 – Revision 1.1 PI7C8150A completes the transaction normally. 6.2.4 POSTED WRITE TRANSACTIONS During downstream posted write transactions, when PI7C8150A responds as a target, it detects a data parity error on the initiator (primary) bus and the following events occur: PI7C8150A asserts P_PERR_L two cycles after the data transfer, if the parity error response bit is set in the command register of primary interface. PI7C8150A sets the parity error detected bit in the status register of the primary interface. PI7C8150A captures and forwards the bad parity condition to the secondary bus. PI7C8150A completes the transaction normally. Similarly, during upstream posted write transactions, when PI7C8150A responds as a target, it detects a data parity error on the initiator (secondary) bus, the following events occur: PI7C8150A asserts S_PERR_L two cycles after the data transfer, if the parity error response bit is set in the bridge control register of the secondary interface. PI7C8150A sets the parity error detected bit in the status register of the secondary interface. PI7C8150A captures and forwards the bad parity condition to the primary bus. PI7C8150A completes the transaction normally. During downstream write transactions, when a data parity error is reported on the target (secondary) bus by the target’s assertion of S_PERR_L, the following events occur: PI7C8150A sets the data parity detected bit in the status register of secondary interface, if the parity error response bit is set in the bridge control register of the secondary interface. PI7C8150A asserts P_SERR_L and sets the signaled system error bit in the status register, if all the following conditions are met: The SERR_L enable bit is set in the command register. The posted write parity error bit of P_SERR_L event disable register is not set. The parity error response bit is set in the bridge control register of the secondary interface. The parity error response bit is set in the command register of the primary interface. PI7C8150A has not detected the parity error on the primary (initiator) bus which the parity error is not forwarded from the primary bus to the secondary bus. 06-0057 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |