| 전자부품 데이터시트 검색엔진 |
|
PI7C8150AND 데이터시트(PDF) 75 Page - Pericom Semiconductor Corporation |
|
|
|||||||||||||||||||||||||||||
PI7C8150AND 데이터시트(HTML) 75 Page - Pericom Semiconductor Corporation |
|
75 / 111 page ![]() PI7C8150A 2-PORT PCI-TO-PCI BRIDGE Page 75 of 111 APRIL 2006 – Revision 1.1 P_CBE [3:0] Command Action 0001 Special Cycle Do not claim. Ignore. 0010 I/O Read 1. If address is within pass through I/O range, claim and pass through. 2. Otherwise, do not pass through and do not claim for internal access. 0011 I/O Write Same as I/O Read. 0100 Reserved ----- 0101 Reserved ----- 0110 Memory Read 1. If address is within pass through memory range, claim and pass through. 2. If address is within pass through memory mapped I/O range, claim and pass through. 3. Otherwise, do not pass through and do not claim for internal access. 0111 Memory Write Same as Memory Read. 1000 Reserved ----- 1001 Reserved ----- 1010 Configuration Read Type 0 Configuration Read: If the bridge’s IDSEL line is asserted, perform function decode and claim if target function is implemented. Otherwise, ignore. If claimed, permit access to target function’s configuration registers. Do not pass through under any circumstances. Type 1 Configuration Read: 1. If the target bus is the bridge’s secondary bus: claim and pass through as a Type 0 Configuration Read. 2. If the target bus is a subordinate bus that exists behind the bridge (but not equal to the secondary bus): claim and pass through as a Type 1 Configuration Read. 3. Otherwise, ignore. 1011 Configuration Write Type 0 Configuration Write: same as Configuration Read. Type 1 Configuration Write (not special cycle request): 1. If the target bus is the bridge’s secondary bus: claim and pass through as a Type 0 Configuration Write 2. If the target bus is a subordinate bus that exists behind the bridge (but not equal to the secondary bus): claim and pass through unchanged as a Type 1 Configuration Write. 3. Otherwise, ignore. Configuration Write as Special Cycle Request (device = 1Fh, function = 7h) 1. If the target bus is the bridges secondary bus: claim and pass through as a special cycle. 2. If the target bus is a subordinate bus that exists behind the bridge (but not equal to the secondary bus): claim and pass through unchanged as a type 1 Configuration Write. 3. Otherwise ignore 1100 Memory Read Multiple Same as Memory Read 1101 Dual Address Cycle Supported 1110 Memory Read Line Same as Memory Read 06-0057 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |