PAC1721 datasheet(71/92 Pages) MICROCHIP

71 / 92 page

 2026 Microchip Technology Inc. and its subsidiaries

DS-20007088A-page 71

PAC1721

ACC_FULL_LIMIT (ADDRESS 1BH)

R/W-0

R/W-1

ACC_FULL[5:0]

ACC_COUNT_FULL[1:0]

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as 0

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

X = Bit is unknown

This register is used to set a limit for how full the VACC and ACC_COUNT registers can be before the Accumulator

Overflow and Accumulator Count Oveflow alerts are triggered.

Any changes to this register become active after a Refresh (any) command is sent.

Disable alerts in the ALERT_ENABLE register before making changes to the ACC_FULL_LIMIT register to avoid false

triggers.

bit 7:2

ACC_FULL[5:0]: These six bits are configurable to match the six MSBs of the VACC register.

An alert triggers when the six MSBs of the VACC register ≥ the 6-bit value stored in ACC_FULL_LIMIT

In bipolar mode, an alert triggers if the absolute value of the VACC register is more negative or more

positive than the set limit. Setting this register to 3Fh does not generate an alert as this the maximum

value that can be stored in the VACC register.

bit 1:0

ACC_COUNT_FULL[1:0] Configure the fullness limit for the ACC_COUNT register.

00b = 100% Full

01b = 15/16 (~ 93%) Full (default)

10b = 7/8 (~ 87%) Full

11b = 3/4 (75%) Full

PAC1721 데이터시트(PDF) 71 Page - Microchip Technology