FS2101 datasheet(20/48 Pages) HP

20 / 48 page

RESRVD

0100

RESRVD

0101

MEM_RD

0110

MEM_WR

0111

RESRVD

1000

RESRVD

1001

CON_RD

1010

CON_WR

1011

MEMRDM

1100

DAC_CY

1101

MEMRDL

1110

MEMWRI

1111

I/O_XACTIONS

001X

MEM_XACTIONS

011X

CONFIG_XACTIONS

101X

The PCI Active Analysis Probe is a universal PCI short card that

attaches to Agilent logic analyzers. The Analysis Probe has five

major parts:

The input buffers

The latching buffers

The interface to the logic analyzer

The clocking and cycle bit generation logic

The extender card connector

The input buffers present a single electrical load on the PCI bus

and are made up of IDT162260 tri-port buffers. The PCI clock is

buffered by a Motorola 807 high speed clock buffer.

When the Analysis Probe is in Timing mode output Port 2 of the

tri-port

buffers

goes

directly

the

logic

analyzer

input

terminators.

When in State mode output Port 2 is tri-stated.

Output port 1 is always enabled and goes to the latching buffers.

Theory of Operation

The Input Buffers

FS2101 데이터시트(PDF) 20 Page - Agilent(Hewlett-Packard)

FS2101 데이터시트(HTML) 20 Page - Agilent(Hewlett-Packard)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

데이터시트 다운로드

링크 URL