전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

CTJ3LQLPRO 데이터시트(PDF) 10 Page - Clarke International

부품명 CTJ3LQLPRO
상세설명  INTELLIGENT BATTERY CHARGER-STARTER
PDF  24 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  CLARKE [Clarke International]
홈페이지  https://www.clarkeinternational.com/
Logo CLARKE - Clarke International

CTJ3LQLPRO 데이터시트(HTML) 10 Page - Clarke International

Back Button CTJ3LQLPRO Datasheet HTML 6Page - Clarke International CTJ3LQLPRO Datasheet HTML 7Page - Clarke International CTJ3LQLPRO Datasheet HTML 8Page - Clarke International CTJ3LQLPRO Datasheet HTML 9Page - Clarke International CTJ3LQLPRO Datasheet HTML 10Page - Clarke International CTJ3LQLPRO Datasheet HTML 11Page - Clarke International CTJ3LQLPRO Datasheet HTML 12Page - Clarke International CTJ3LQLPRO Datasheet HTML 13Page - Clarke International CTJ3LQLPRO Datasheet HTML 14Page - Clarke International Next Button
Zoom Inzoom in Zoom Outzoom out
 10 / 24 page
background image
10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
GENERAL PREPARATION
CHARGER LOCATION
1. Place the charger as far away from the car battery as possible.
2. DO NOT let battery acid drip on anything when reading specific gravity or
when topping up the battery.
3. DO NOT operate the charger in an enclosed space, such as inside the
vehicle. NEVER cover the battery charger when in use.
4. DO NOT stand the battery on top of the charger.
5. ALWAYS stand the battery charger on a firm, level floor.
6. During charging, make sure that the area around the battery has good
ventilation.
OPERATING INSTRUCTIONS
Before charging, make sure the capacity of the battery to be charged is not
lower than 4Ah. On the rear of the charger you will find separate connectors
for 12V and 24V batteries making sure the correct cable is connected to the
appropriate battery.
CONNECTING TO A BATTERY INSTALLED IN THE VEHICLE
1. Arrange the leads carefully to reduce the risk of damage caused by sharp
edges.
2. Identify the voltage of the battery to be charged (12v or 24v) and attach
the POSITIVE (RED) lead to the appropriate terminal on the rear of the
charger.
3. Identify the polarity of the battery posts. The positive battery terminal is
typically marked by the letters/symbols: POS, P or +. The negative battery
terminal is typically marked by the letters/symbols: NEG, N or -.
4. DO NOT make any connections to the carburetor, fuel lines or thin metal
parts.
5. Consult the vehicle manual to confirm if the vehicle has a Negative or
Positive earth.
• For negative earth vehicles, connect the POSITIVE (RED) lead and clamp
from the battery charger to the POSITIVE terminal on the battery. Then
connect the NEGATIVE (BLACK) lead and clamp to the vehicle frame or
engine block away from the battery.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com