 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
ST72611F1 데이터시트(PDF) 78 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72611F1 데이터시트(HTML) 78 Page - STMicroelectronics |
|
|
78 / 80 page  ERRATA SHEET 78/80 18 SILICON LIMITATIONS 18.1 LVD RESET ON VDD BROWNOUT If VDD drops into the range 2.4V to 0.5V but does not go below 0.5V, the LVD reset is not held low and follows the level of VDD. In this case, USBVCC may not be correctly acti- vated. At power-on, VDD must rise monotonously to ensure the LVD reset stays low until the VIT+ threshold is crossed (see Figure 58) To reset the device correctly and recover normal operation, the VDD must be brought below 0.5V. The LVD reset functions correctly if VDD drops into the range VIT- to 2.4V or if VDD drops below 0.5V. Figure 58. LVD Reset on VDD Brownout VIT- 2.4 0.5 VIT+ RESET UNCORRECT FUNCTION |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
