ST72371 datasheet(88/94 Pages) STMICROELECTRONICS

부품명	ST72371

상세설명	8-BIT MCUs WITH 16K ROM/OTP/EPROM,512 BYTES RAM, ADC, DAC (PWM), TIMER, I2C AND SCI

PDF	94 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

88 / 94 page

88/94

ST72371/ST72372

7 GENERAL INFORMATION

7.1 EPROM ERASURE

EPROM version devices are erased by exposure

to high intensity UV light admitted through the

transparent window. This exposure discharges the

floating gate to its initial state through induced

photo current.

It is recommended that the EPROM devices be

kept out of direct sunlight, since the UV content of

sunlight can be sufficient to cause functional fail-

ure. Extended exposure to room level fluorescent

lighting may also cause erasure.

An opaque coating (paint, tape, label, etc...)

should be placed over the package window if the

product is to be operated under these lighting con-

ditions. Covering the window also reduces IDD in

power-saving modes due to photo-diode leakage

currents.

An Ultraviolet source of wave length 2537 Å yield-

ing a total integrated dosage of 15 Watt-sec/cm

2 is

required to erase the device. It will be erased in 15

to 20 minutes if such a UV lamp with a 12mW/cm2

power rating is placed 1 inch from the device win-

dow without any interposed filters.

ST72371 데이터시트(PDF) 88 Page - STMicroelectronics