| 전자부품 데이터시트 검색엔진 |
|
ST72371 데이터시트(PDF) 28 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72371 데이터시트(HTML) 28 Page - STMicroelectronics |
|
28 / 94 page ![]() 28/94 ST72371/ST72372 I/O PORTS (Cont’d) 4.1.3 Register Description DATA REGISTERS (DR) Read/Write Reset Value: 0000 0000 (00h) Bit 7:0 = D7-D0 Data Register 8 bits. The behaviour of the DR register depends on the selected input/output configuration. Writing the DR register is always taken in account even if the pin is configured as an input. Reading the DR register returns either the DR register latch content (pin configured as output) or the digital value applied to the I/O pin (pin configured as input). DATA DIRECTION REGISTERS (DDR) Read/Write Reset Value: 0000 0000 (00h) (input mode) Bit 7:0 = DD7-DD0 Data Direction Register 8 bits. The DDR register gives the input/output direction configuration of the pins. Each bit is set and cleared by software. 0: Input mode 1: Output mode OPTION REGISTER (OR) Read/Write Reset Value: 0000 0000 (00h) Bit 7:0 = AD[7:0] Port B Digital/Analog Input Con- figuration Bits. 0: The pull-up is connected and pin configured as digital input (reset condition) 1: The pull-up is disconnected and the pin is con- figured as analog input. 70 D7 D6 D5 D4 D3 D2 D1 D0 70 DD7 DD6 DD5 DD4 DD3 DD2 DD1 DD0 70 AD7 AD6 AD5 AD4 AD3 AD2 AD1 AD0 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |