UM0034 datasheet(21/39 Pages) STMICROELECTRONICS

21 / 39 page

ST7-EMU3 series emulator

Emulation configuration

21/39

4.4

EMU3 probe

The EMU3 probe (Figure 21) has a modular design that allows you to emulate the full range

of ST7. This design is based on:

an interchangeable, target emulation board (TEB) that is specific to the ST7 or family of

ST7s that you want to emulate.

a common emulation board (CEB) and a dedicated emulation board (DEB) that are

common to all ST7. The TEB connects to the DEB, which is housed in your EMU3

probe.

The probe connects to your application board during emulation via a flex adapter and

socket. In addition, an analyzer input connector allows the connection of external devices, or

input signals from your application hardware. More information about these connections is

provided in the ST7xxxx-EMU3 Probe User Guide.

Figure 21.

EMU3 probe

4.4.1

Target emulation board (TEB)

To reconfigure your EMU3 probe to emulate another ST7 or family of ST7s, simply install the

appropriate target emulation board (TEB) in the EMU3 probe. TEBs can be ordered

independently. For information about the TEB to choose, refer to the ST Product and Tool

Selection Guide. Installing and changing the TEB is described in detail in the ST7xxxx-

EMU3 Probe User Guide provided with your probe.

4.4.2

Application board connectors

Connectors on the TEB allow you to connect your probe to your application board, using the

appropriate flex adapter and socket. How you connect your EMU3 probe to your application

board depends on the ST7 and its package. Different application connectors are provided

with your emulator, depending on the MCUs supported by its probe. For a list of connectors

provided with your probe and detailed installation instructions, refer to the ST7xxxx-EMU3

Probe User Guide provided with your probe.

EMU3 probe

Access for flex adapter for

connection to the application board

Micro Connect ports

Analyzer input

connector

UM0034 데이터시트(PDF) 21 Page - STMicroelectronics