STM32W108HB datasheet(32/179 Pages) STMICROELECTRONICS

32 / 179 page

Radio frequency module

STM32W108CB, STM32W108HB

32/179

Doc ID 16252 Rev 2

The primary features of the MAC are:

●

CRC generation, appending, and checking

●

Hardware timers and interrupts to achieve the MAC symbol timing

●

Automatic preamble and SFD pre-pending on Tx packets

●

Address recognition and packet filtering on Rx packets

●

Automatic acknowledgement transmission

●

Automatic transmission of packets from memory

●

Automatic transmission after backoff time if channel is clear (CCA)

●

Automatic acknowledgement checking

●

Time stamping received and transmitted messages

●

Attaching packet information to received packets (LQI, RSSI, gain, time stamp, and

packet status)

●

IEEE 802.15.4 timing and slotted/unslotted timing

4.5

Packet trace interface (PTI)

The STM32W108 integrates a true PHY-level PTI for effective network-level debugging. It

monitors all the PHY Tx and Rx packets between the MAC and baseband modules without

affecting their normal operation. It cannot be used to inject packets into the PHY/MAC

interface. This 500 kbps asynchronous interface comprises the frame signal (PTI_EN, PA4)

and the data signal (PTI_DATA, PA5).

4.6

Random number generator

Thermal noise in the analog circuitry is digitized to provide entropy for a true random

number generator (TRNG). The TRNG produces 16-bit uniformly distributed numbers. The

Software can use the TRNG to seed a pseudo random number generator (PNRG). The

TRNG is also used directly for cryptographic key generation.

STM32W108HB 데이터시트(PDF) 32 Page - STMicroelectronics