| 전자부품 데이터시트 검색엔진 |
|
ATmega16HVB 데이터시트(PDF) 80 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATmega16HVB 데이터시트(HTML) 80 Page - ATMEL Corporation |
|
80 / 273 page ![]() 80 8042A–AVR–07/09 ATmega16HVB/32HVB 16.2 External Clock Source An external clock source applied to the Tn pin can be used as Timer/Counter clock (clk Tn). The Tn pin is sampled once every system clock cycle by the pin synchronization logic. The synchro- nized (sampled) signal is then passed through the edge detector. Figure 16-2 shows a functional equivalent block diagram of the Tn synchronization and edge detector logic. The registers are clocked at the positive edge of the internal system clock (clk I/O). The latch is transparent in the high period of the internal system clock. The edge detector generates one clk Tn pulse for each positive (CSn2:0 = 7) or negative (CSn2:0 = 6) edge it detects. See Table 16-1 on page 81 for details. Figure 16-2. Tn Pin Sampling The synchronization and edge detector logic introduces a delay of 2.5 to 3.5 system clock cycles from an edge has been applied to the Tn pin to the counter is updated. Enabling and disabling of the clock input must be done when Tn has been stable for at least one system clock cycle, otherwise it is a risk that a false Timer/Counter clock pulse is generated. Each half period of the external clock applied must be longer than one system clock cycle to ensure correct sampling. The external clock must be guaranteed to have less than half the sys- tem clock frequency (f ExtClk < fclk_I/O/2) given a 50/50% duty cycle. Since the edge detector uses sampling, the maximum frequency of an external clock it can detect is half the sampling fre- quency (Nyquist sampling theorem). However, due to variation of the system clock frequency and duty cycle caused by Oscillator source (crystal, resonator, and capacitors) tolerances, it is recommended that maximum frequency of an external clock source is less than f clk_I/O/2.5. An external clock source can not be prescaled. Note: The synchronization logic on the input pins ( Tn) is shown in Figure 16-2. Tn_sync (To Clock Select Logic) Edge Detector Synchronization DQ DQ LE DQ Tn clk I/O |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |