LPC4350 datasheet(67/145 Pages) NXP

67 / 145 page

LPC4350_30_20_10

All information provided in this document is subject to legal disclaimers.

Objective data sheet

Rev. 2.1 — 23 September 2011

67 of 145

NXP Semiconductors

LPC4350/30/20/10

32-bit ARM Cortex-M4/M0 microcontroller

• Software interrupt generation.

7.6.2 Interrupt sources

Each peripheral device has one interrupt line connected to the NVIC but may have several

interrupt flags. Individual interrupt flags may also represent more than one interrupt

source.

7.7 Event router

The event router combines various internal signals, interrupts, and the external interrupt

pins (WAKEUP[3:0]) to create an interrupt in the NVIC if enabled and to create a wake-up

signal to the ARM core and the CCU for waking up from Sleep, Deep-sleep, Power-down,

and Deep power-down modes. Individual events can be configured as edge or level

sensitive and can be enabled or disabled in the event router. The event router can be

battery powered.

The following events if enabled in the event router can create a wake-up signal and/or an

interrupt:

• External pins WAKEUP0/1/2/3 and RESET

• Alarm timer, RTC, WWDT, BOD interrupts

• C_CAN and QEI interrupts

• Ethernet, USB0, USB1 signals

• Selected outputs of combined timers (SCT and timer0/1/3)

7.8 Global Input Multiplexer Array (GIMA)

The GIMA allows to route signals to event-driven peripheral targets like the SCT, timers,

event router, or the ADCs.

7.8.1 Features

• Single selection of a source.

• Signal inversion.

• Can capture a pulse if the input event source is faster than the target clock.

• Synchronization of input event and target clock.

• Single-cycle pulse generation for target.

7.9 System Tick timer (SysTick)

The ARM Cortex-M4 includes a system tick timer (SYSTICK) that is intended to generate

a dedicated SYSTICK exception at a 10 ms interval.

7.10 On-chip static RAM

The LPC4350/30/20/10 support up to 200 kB local SRAM and an additional 64 kB AHB

SRAM with separate bus master access for higher throughput and individual power

control for low power operation.

LPC4350 데이터시트(PDF) 67 Page - NXP Semiconductors

LPC4350 데이터시트(HTML) 67 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL