SPC56EC74L7 datasheet(48/118 Pages) STMICROELECTRONICS

48 / 118 page

Electrical Characteristics

SPC564Bxx - SPC56ECxx

48/118

Doc ID 17478 Rev 4

Electrical Characteristics

This section contains electrical characteristics of the device as well as temperature and

power considerations.

This product contains devices to protect the inputs against damage due to high static

voltages. However, it is advisable to take precautions to avoid application of any voltage

higher than the specified maximum rated voltages.

To enhance reliability, unused inputs can be driven to an appropriate logic voltage level (VDD

or VSS_HV). This could be done by the internal pull-up and pull-down, which is provided by

the product for most general purpose pins.

The parameters listed in the following tables represent the characteristics of the device and

its demands on the system.

In the tables where the device logic provides signals with their respective timing

characteristics, the symbol “CC” for Controller Characteristics is included in the Symbol

column.

In the tables where the external system must provide signals with their respective timing

characteristics to the device, the symbol “SR” for System Requirement is included in the

Symbol column.

4.1

Parameter classification

The electrical parameters shown in this supplement are guaranteed by various methods. To

give the customer a better understanding, the classifications listed in Table 6 are used and

the parameters are tagged accordingly in the tables where appropriate.

Note:

The classification is shown in the column labeled “C” in the parameter tables where

appropriate.

4.2

NVUSRO register

Portions of the device configuration, such as high voltage supply is controlled via bit values

in the Non-Volatile User Options Register (NVUSRO). For a detailed description of the

NVUSRO register, see SPC564Bxx and SPC56ECxx Reference Manual.

Table 6.

Parameter classifications

Classification tag

Tag description

Those parameters are guaranteed during production testing on each individual device.

Those parameters are achieved by the design characterization by measuring a statistically

relevant sample size across process variations.

Those parameters are achieved by design characterization on a small sample size from typical

devices under typical conditions unless otherwise noted. All values shown in the typical

column are within this category.

Those parameters are derived mainly from simulations.

SPC56EC74L7 데이터시트(PDF) 48 Page - STMicroelectronics

SPC56EC74L7 데이터시트(HTML) 48 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL