Z8018010VSC datasheet(53/85 Pages) ZILOG

53 / 85 page

Z80180

Microprocessor Unit

PS014004-1106

Architecture

clears EF to 0 when TRDR is read or written. EF is cleared to 0 during RESET and IOSTOP

mode.

EIE: End Interrupt Enable (bit 6)—EIE is set to 1 to generate a CPU interrupt request.

The interrupt request is inhibited if EIE is reset to 0. EIE is cleared to 0 during RESET.

RE: Receive Enable (bit 5)—A CSIO receive operation is started by setting RE to 1.

When RE is set to 1, the data clock is enabled. In internal clock mode, the data clock is out-

put from the CKS pin. In external clock mode, the clock is input on the CKS pin. In either

case, data is shifted in on the RXS pin in synchronization with the (internal or external) data

clock. After receiving 8 bits of data, the CSIO automatically clears RE to 0, EF is set to 1, and

an interrupt (if enabled by EIE = 1) is generated. RE and TE are never both set to 1 at the

same time. RE is cleared to 0 during RESET and ISTOP mode.

Transmit Enable (bit 4)—A CSIO transmit operation is started by setting TE to 1. When

is set to 1, the data clock is enabled. When in internal clock mode, the data clock is out-

put from the CKS pin. In external clock mode, the clock is input on the CKS pin. In either

case, data is shifted out on the TXS pin synchronous with the (internal or external) data

clock. After transmitting 8 bits of data, the CSIO automatically clears TE to 0, EF is set to 1,

and an interrupt (if enabled by EIE = 1) is generated. TE and RE are never both set to 1 at the

same time. TE is cleared to 0 during RESET and IOSTOP mode.

SS2, 1, 0: Speed Select 2, 1, 0 (bits 2-0)—SS2, SS1 and SS0 select the CSIO transmit/

receive clock source and speed. SS2, SS1 and SS0 are all set to 1 during RESET. Table 13 lists

the CSIO Baud Rate selection.

After RESET, the CKS pin is configured as an external clock input (SS2, SS1, SS0 = 1).

Changing these values causes CKS to become an output pin and the selected clock is output

when transmit or receive operations are enabled.

Table 13. CSIO Baud Rate Selection

SS2

SS1

SS0

Divide Ratio

000

÷20

001

÷40

010

÷80

011

÷160

100

÷320

101

÷640

110

÷1280

111External Clock Input

(less than

÷20)

Z8018010VSC 데이터시트(PDF) 53 Page - Zilog, Inc.

Z8018010VSC 데이터시트(HTML) 53 Page - Zilog, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85

데이터시트 다운로드

링크 URL