| 전자부품 데이터시트 검색엔진 |
|
ST7FLITE25F2B6 데이터시트(PDF) 52 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7FLITE25F2B6 데이터시트(HTML) 52 Page - STMicroelectronics |
|
52 / 166 page ![]() Power saving modes ST7LITE20F2 ST7LITE25F2 ST7LITE29F2 52/166 Doc ID 8349 Rev 5 9 Power saving modes 9.1 Introduction To give a large measure of flexibility to the application in terms of power consumption, five main power saving modes are implemented in the ST7 (see Figure 21): ● Slow ● Wait (and Slow-Wait) ● Active Halt ● Auto Wake up From Halt (AWUF) ● Halt After a RESET the normal operating mode is selected by default (Run mode). This mode drives the device (CPU and embedded peripherals) by means of a master clock which is based on the main oscillator frequency divided or multiplied by 2 (fOSC2). From RUN mode, the different power saving modes may be selected by setting the relevant register bits or by calling the specific ST7 software instruction whose action depends on the oscillator status. Figure 21. Power saving mode transitions 9.2 SLOW mode This mode has two targets: ● To reduce power consumption by decreasing the internal clock in the device, ● To adapt the internal clock frequency (fCPU) to the available supply voltage. POWER CONSUMPTION WAIT SLOW RUN ACTIVE-HALT HIGH LOW SLOW-WAIT AUTO-WAKEUP FROM HALT HALT |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |