DOC7707 datasheet(17/307 Pages) ETC1

17 / 307 page

7707F–AVR–11/10

AT90USB82/162

Figure 5-1.

Program Memory Map

5.2

SRAM Data Memory

Figure 5-2 shows how the AT90USB82/162 SRAM Memory is organized.

The AT90USB82/162 is a complex microcontroller with more peripheral units than can be sup-

ported within the 64 location reserved in the Opcode for the IN and OUT instructions. For the

Extended I/O space from $060 - $0FF in SRAM, only the ST/STS/STD and LD/LDS/LDD instruc-

tions can be used.

The first 768 Data Memory locations address the Register File, the I/O Memory, Extended I/O

Memory, and the internal data SRAM. The first 32 locations address the Register file, the next

64 location the standard I/O Memory, then 160 locations of Extended I/O memory, and the 512

locations of internal data SRAM.The five different addressing modes for the data memory cover:

Direct, Indirect with Displacement, Indirect, Indirect with Pre-decrement, and Indirect with Post-

increment. In the Register file, registers R26 to R31 feature the indirect addressing pointer

registers.

The direct addressing reaches the entire data space.

The Indirect with Displacement mode reaches 63 address locations from the base address given

by the Y- or Z-register.

When using register indirect addressing modes with automatic pre-decrement and post-incre-

ment, the address registers X, Y, and Z are decremented or incremented.

0x00000

0x1FFF (8KBytes)

0x3FFF (16KBytes)

Program Memory

Application Flash Section

Boot Flash Section

DOC7707 데이터시트(PDF) 17 Page - List of Unclassifed Manufacturers