DAC5687IPZP datasheet(39/79 Pages) TI

39 / 79 page

www.ti.com

Q(t)

I(t)

qmc_gain_a/210

{0, 1/210, ..., 2 – 1/210}

qmc_phase/210

{–1/2, –1/2 + 1/210, ..., 1/2 – 1/210}

qmc_gain_b/210

{0, 1/210, ..., 2 – 1/210}

B0164−01

L-

side-

band

side-

band

Uncorrected

Corrected

C003

DAC Offset Control

DAC5687

SLWS164E – FEBRUARY 2005 – REVISED SEPTEMBER 2006

Figure 40. QMC Block Diagram

Figure 41. Example of Sideband Optimization Using QMC Phase and Gain Adjustments

Registers daca_offset and dacb_offset control the I and Q path offsets and are 13-bit values with a range of

–4096 to 4095. The DAC offset value adds a digital offset to the digital data before digital-to-analog conversion.

The qmc_gain_a and qmc_gain_b registers can be used to back off the signal before the offset to prevent

saturation when the offset value is added to the digital signal. The offset values are in 2s-complement format.

It takes four DAC clock cycles to update the 14-bit DAC5687 offset registers. During the first clock cycle, the two

MSBs,

daca_offset(13:12)

and

dacb_offset(13:12),

are

updated,

followed

daca_offset(11:8)

and

dacb_offset(11:8) on the second clock cycle, daca_offset(7:4) and dacb_offset(7:4) on the third clock cycle, and

daca_offset(3:0) and dacb_offset(3:0) on the fourth clock cycle.

Submit Documentation Feedback

Product Folder Link(s): DAC5687

DAC5687IPZP 데이터시트(PDF) 39 Page - Texas Instruments