전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

UM1620 데이터시트(PDF) 12 Page - STMicroelectronics

부품명 UM1620
상세설명  Standard software driver for C90FL
PDF  41 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

UM1620 데이터시트(HTML) 12 Page - STMicroelectronics

Back Button UM1620 Datasheet HTML 8Page - STMicroelectronics UM1620 Datasheet HTML 9Page - STMicroelectronics UM1620 Datasheet HTML 10Page - STMicroelectronics UM1620 Datasheet HTML 11Page - STMicroelectronics UM1620 Datasheet HTML 12Page - STMicroelectronics UM1620 Datasheet HTML 13Page - STMicroelectronics UM1620 Datasheet HTML 14Page - STMicroelectronics UM1620 Datasheet HTML 15Page - STMicroelectronics UM1620 Datasheet HTML 16Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 12 / 41 page
background image
API specification
UM1620
12/41
DocID024388 Rev 3
Return values
Troubleshooting
Comments
When shadowFlag is set to FALSE, the ‘FlashErase()’ function erases the blocks in the main
array. It is capable of erasing any combination of blocks in the low, mid and high address
spaces in one operation. If shadowFlag is TRUE, this function erases the shadow row.
The inputs lowEnabledBlocks, midEnabledBlocks and highEnabledBlocks are bit-mapped
arguments that are used to select the blocks to be erased in the Low/Mid/High address
spaces of main array. The selection of the blocks of the main array is determined by
setting/clearing the corresponding bit in lowEnabledBlocks, midEnabledBlocks or
highEnabledBlocks.
The bit allocations for blocks in one address space are: bit 0 is assigned to block 0, bit 1 to
block 1, etc. The following diagrams show the formats of lowEnabledBlocks,
midEnabledBlocks and highEnabledBlocks for the C90FL module.
For low address space valid bits are from bit 0 to bit (lowBlockNum – 1). In which,
lowBlockNum is the number of low blocks returned from FlashInit();
For middle address space valid bits are from bit 0 and bit (midBlockNum – 1). In which,
midBlockNum is the number of middle blocks returned from FlashInit();
For high address space valid bits are from bit 0 to bit (highBlockNum – 1). In which,
highBlockNum is the number of high blocks returned from FlashInit();
Table 7. Return values for FlashErase()
Type
Description
Possible values
UINT32
Successful completion or error value.
C90FL_OK
C90FL_ERROR_BUSY
C90FL_ERROR_EGOOD
Table 8. Troubleshooting for FlashErase()
Error codes
Possible causes
Solution
C90FL_ERROR_BUSY
New erase operation cannot be
performed because there is
program/erase sequence in
progress on the Flash module.
Wait until all previous
program/erase operations on the
Flash module finish.
Possible cases that erase cannot
start are:
– erase in progress
(FLASH_MCR-ERS is high);
– program in progress
(FLASH_MCR-PGM is high);
C90FL_ERROR_ EGOOD
Erase operation failed.
Check if the C90FL is available
and high voltage is applied to
C90FL. Then try to do the erase
operation again.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com