| 전자부품 데이터시트 검색엔진 |
|
AN2816 데이터시트(PDF) 14 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2816 데이터시트(HTML) 14 Page - STMicroelectronics |
|
14 / 36 page ![]() Configuration AN2816 14/36 7 Configuration The PM6675S demonstration board allows the user to choose the desired mode of operation using four jumpers (JP1, JP2, JP3 and JP5) and two resistors. Refer to the following configuration description. 7.1 JP3 fixed or adjustable output voltage (VSEL pin) The JP3 jumper is used to choose between fixed output voltage (1.5 V) and a user-defined output voltage in the range 0.6 V to 3.3 V. When connected in the lower position, the fixed 1.5 V output voltage is selected (Figure 9). If JP3 is in the upper position, the output voltage is given by: Equation 1 The R8 and R9 resistors are set to 12 k Ω and 13 kΩ respectively (1.25 V output voltage) and can be changed by the user. 7.2 JP1 power-saving mode (NOSKIP pin) The JP1 jumper allows choosing the mode of operation of the switching section. Three options (forced-PWM, pulse-skip and non-audible pulse-skip) can be selected by changing the JP1 setting as shown in Figure 10: Figure 9. JP3 (VSEL) setting 8 R 9 R 8 R 6 . 0 VOUTADJ + ⋅ = |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |