AN4506 datasheet(22/47 Pages) STMICROELECTRONICS

22 / 47 page

Interrupt generation

AN4506

22/47

DocID026442 Rev 2

5.1

Interrupt pin configuration

The device is provided with two pins which can be activated to generate either the data-

ready or the interrupt signals. The functionality of the pins is selected through CTRL3(22h).

Refer to Table 16, Table 17 and to the block diagram in Figure 11 for more details.

Figure 11. Interrupt signals and interrupt pins

Table 16. CTRL3 register

INT1_IG

INT1_Boot

H_Lactive

PP_OD

INT2_DRDY

INT2_FTH

INT2_ORun INT2_Empty

Table 17. CTRL3 description

INT1_IG

Interrupt enable on INT1 pin. Default value 0. (0: disable; 1: enable)

INT1_Boot

Boot status available on INT1. Default value 0. (0: disable; 1: enable)

H_Lactive

Interrupt active configuration on INT1. Default value 0. (0: high; 1: low)

PP_OD

Push-Pull / Open drain. Default value: 0. (0: push-pull; 1: open drain)

INT2_DRDY Data Ready on DRDY/INT2. Default value 0. (0: disable; 1: enable)

INT2_FTH

FIFO Threshold interrupt on DRDY/INT2. Default value: 0. (0: disable; 1: enable)

INT2_ORun

FIFO Overrun interrupt on DRDY/INT2 Default value: 0. (0: disable; 1: enable)

INT2_Empty FIFO Empty interrupt on DRDY/INT2. Default value: 0. (0: disable; 1: enable)

AN4506 데이터시트(PDF) 22 Page - STMicroelectronics