AN3311 datasheet(35/58 Pages) STMICROELECTRONICS

35 / 58 page

AN3311

Getting started with the system

Doc ID 18209 Rev 1

35/58

/* Exported variables--------------------------------------------------------*/

LCD_HW_Parameters_TypeDef* pLcdParam;

TSC_HW_Parameters_TypeDef* pTscParam;

JOY_HW_Parameters_TypeDef* pJoyParam;

BTN_HW_Parameters_TypeDef* pBtnParam;

extern volatile GL_u8 touch_done;

GL_s16 smart_points1[N_SAMPLES];

GL_s16 smart_points1B[N_SAMPLES];

GL_s16 smart_points2[N_SAMPLES];

GL_s16 smart_points2B[N_SAMPLES];

SmartPlugType** ppSmartPlugList;

SmartPlugType* pCurrentSmartPlug;

extern GL_Page_TypeDef pageS2B;

extern GL_Page_TypeDef pageS2C;

/* Private macro -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

static volatile ErrorStatus HSEStartUpStatus /*= SUCCESS*/;

volatile GL_u8 restart_calibration = 0;

GPIO_InitTypeDef GPIO_InitStructure;

static u32 TimingDelay;

static xTaskHandle xEmberTaskHandle, xApplTaskHandle, xSmartSamplingTaskHandle,

xGraphLibTaskHandle;

/* The time between cycles of the 'check' functionality (defined within the tick

hook. */

#define mainCHECK_DELAY

( ( portTickType ) 5000 / portTICK_RATE_MS )

/* Task priorities. */

#define EMBER_Task

( tskIDLE_PRIORITY + 3 )

#define APPLICATION_Tick_Task

( tskIDLE_PRIORITY + 2 )

#define mainINIT_TASK_PRIORITY

( tskIDLE_PRIORITY + 1 )

/* The period of the system clock in nano seconds. This is used to calculate the

jitter time in nano seconds. */

#define mainNS_PER_CLOCK ((unsigned portLONG)((1.0 /

(double)configCPU_CLOCK_HZ)*1000000000.0))

/*-----------------------------------------------------------*/

/* Configure the hardware for the demo. */

static void prvSetupHardware( void );

static void vEmberTickTask( void *pvParameters );

extern void EZSPInit(void);

static void prvApplicationTask( void * pvParameters );

void vApplication_EXIT2_ISRFunc( void );

void vApplication_USART0_ISRFunc( void );

/* Configure the hardware for the demo. */

static void prvSetupHardware( void );

/* Configure the board, LCD, Joystick, Button, GPIO and other peripherals as required

by the demo. */

static void vBoardInit( void );

/* Check Touchscreen, Joystick, Button in polling mode as required by the demo. */

static void vGraphicLibraryTask(void *pvParameters);

/* Check the SmartPlug Energy data as required by the demo. */

static void vSmartPlugSamplingTask( void *pvParameters);

AN3311 데이터시트(PDF) 35 Page - STMicroelectronics

AN3311 데이터시트(HTML) 35 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

데이터시트 다운로드

링크 URL