UM0225 datasheet(36/57 Pages) STMICROELECTRONICS

36 / 57 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

3 Designing with CAPS

UM0225

35/56

Figure 32. Programming dialog for single device

The dialog guides you through the following programming steps.

Select programming file and target device

By default, the programming data file for the currently active session is displayed. Use the

Browse button to open another, previously saved programming data file.

The type of target device associated with the programming data file is shown in the Select

device box. Use the drop-down menu to change the device type.

Note:

All other file-related operations within this dialog window operate on the current programming

data file.

Specify JTAG-ISP operation and conditions

Choose one of the available JTAG-ISP operations using the Select operation drop-down

menu. Refer to 3.7.1: JTAG-ISP operations for a more detailed discussion of the

programming options.

Note:

These operations should only be performed on a target device in a known, operational state.

The JTAG-ISP operation may be applied to the following device memory regions.

•

Main Flash

•

Secondary Flash

•

User Code

•

Configuration

•OTP

One or more regions may be selected simultaneously by clicking the desired

checkbox(es). As a convenience, click the All checkbox to select all regions for the JTAG-

ISP operation.

To automatically merge the MCU firmware, click the Merge MCU firmware checkbox.

UM0225 데이터시트(PDF) 36 Page - STMicroelectronics