RM0319 datasheet(193/368 Pages) STMICROELECTRONICS

193 / 368 page

RM0319

Controller area network ports (CAN)

Doc ID 022640 Rev 3

193/368

Controller area network ports (CAN)

This chapter focuses on CAN functionality and operation.

For technical details about the programmable registers related to the CAN, refer to the CAN

registers in the following companion document:

●

RM0321: SPEAr320S address map and registers

15.1

Overview

SPEAr320S provides two independent CAN Controllers that have an AMBA compatible

interface and conform to CAN protocol version 2.0 (both part A and B).

15.2

Main features

●

Supports CAN protocol version 2.0 part A and B

●

Bit rates up to 1 MBit/s

●

32 message objects(136x32 message RAM)

●

Each message object has its own identifier mask

●

Maskable interrupt (level sensitive, edge sensitive)

●

Programmable loop-back mode for self-test operation

●

Disabled automatic retransmission mode for time triggered CAN applications

●

Interfaces to the AMBA APB bus from ARM

15.3

Functional description

Figure 66.

CAN controller block diagram

The CAN core performs communication according to the CAN protocol version 2.0, part A

and B. The bit rate can be programmed to values up to 1MBit/s depending on the used

technology. For the connection to the physical layer, additional transceiver hardware is

CAN

APB

Interface

Module

Interface

Registers

Message

RAM

CAN

CORE

Message Handler

Interrupt

RM0319 데이터시트(PDF) 193 Page - STMicroelectronics

RM0319 데이터시트(HTML) 193 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL