| 전자부품 데이터시트 검색엔진 |
|
PM0237 데이터시트(PDF) 15 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
PM0237 데이터시트(HTML) 15 Page - STMicroelectronics |
|
15 / 88 page ![]() DocID027104 Rev 2 15/88 PM0237 Bluetooth low energy technology 88 1.3.2 Advertising state Advertising states allow Link Layer to transmit advertising packets and also to respond with scan responses to scan requests coming from devices which are actively scanning. An advertiser device can be moved to a standby state by stopping the advertising. Each time a device advertises, it sends the same packet on each of the three advertising channels. This three packets sequence is called an advertising event. The time between two advertising events is referred to as the advertising interval, which can go from 20 milliseconds to every 10.28 seconds. Following is an example of advertising packet that lists the Service UUID that the device implements (General Discoverable flag, tx power = 4dbm, Service data = temperature service and 16 bits service UUIDs). Figure 5. Advertising packet with AD type flags The Flags AD type byte contains the following flag bits: • Limited Discoverable Mode (bit 0); • General Discoverable Mode (bit 1); • BR/EDR Not Supported (bit 2, It is 1 on BLE); • Simultaneous LE and BR/EDR to Same Device Capable (Controller) (bit 3); • Simultaneous LE and BR/EDR to Same Device Capable (Host) (bit 4) The Flags AD type shall be included in the advertising data if any of the bits are non-zero (it is not included in scan response). The following advertising parameters can be set before enabling advertising: • Advertising interval; • Advertising address type; • Advertising device address; • Advertising channel map: which of the three advertising channels should be used; • Advertising filter policy: – Process scan/connection requests from devices in the white list – Process all scan/connection requests (default advertiser filter policy) – Process connection requests from all devices but only scan requests in the white list – Process scan requests from all devices but only connection requests in the white list |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |