| 전자부품 데이터시트 검색엔진 |
|
PM0237 데이터시트(PDF) 20 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
PM0237 데이터시트(HTML) 20 Page - STMicroelectronics |
|
20 / 88 page ![]() Bluetooth low energy technology PM0237 20/88 DocID027104 Rev 2 1.7 Security Manager (SM) The Bluetooth low energy link layer supports encryption and authentication by using the Cipher Block Chaining-Message Authentication Code (CCM) algorithm and a 128-bit AES block cipher. When encryption and authentication are used in a connection, a 4-byte Message Integrity Check (MIC) is appended to the payload of the data channel PDU. Encryption is applied to both the PDU payload and MIC fields. When two devices want to encrypt the communication during the connection, the Security Manager uses the pairing procedure. This procedure allows to authenticate two devices and creates a common link key that can be used as a basis for a trusted relationship or a (single) secure connection. Pairing procedure is a three-phase process. Phase 1: pairing feature exchange • The two connected devices communicates their input/output capabilities by using the Pairing request message. This message also contains a bit stating if out-of-band data is available and the authentication requirements. • There are three input capabilities: a) no input; b) the ability to select yes/no; c) the ability to input a number by using the keyboard. • There are two output capabilities: – No output; – Numeric output: ability to display a six-digit number The information exchanged in Phase 1 is used to select which STK generation method is used in Phase 2. Phase 2: short term key (STK) generation: • The pairing devices first define a Temporary Key (TK), by using one of the following methods. a) The out-of-band (OOB) method which uses out of band communication (example: NFC) for the TK agreement (it is selected if the out-of-band bit is set); b) Passkey Entry method: user passes six numeric digits as the TK between the devices; c) Just Works: this method is not authenticated, and it does not provide any protection against man-in-the-middle (MITM) attacks. Table 10. Combination of Input/Output capabilities on a BLE device No output Display No input No Input No output Display Only Yes/No No Input No output Display Yes/No Keyboard Keyboard only Keyboard Display |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |