| 전자부품 데이터시트 검색엔진 |
|
TDC-GP21 데이터시트(PDF) 38 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
TDC-GP21 데이터시트(HTML) 38 Page - ams AG |
|
38 / 91 page ![]() TDC-GP21 acam messelectronic gmbh - Friedrich-List-Str.4 - 76297 Stutensee - Germany - www.acam.de 3-13 Only in measurement mode 1 negative results are possible. In measurement mode 2 only positive results are possible, given as unsigned numbers. A non-calibrated measure is possible only in measurement mode 1. In measurement mode 1 with calibrated data (ALU) the time intervals that have to be measured can not exceed twice the period of the calibration clock. When measuring bigger time intervals an ALU - overflow will occur and ’hFFFFFFFF is written in the appropriate result register. a. Measurement mode 1 with calibrated data (CALIBRATE = 1) The results are given in multiples of the internal reference clock (= external reference clock divided by 1, 2 or 4 (DIV_CLKHS)). Calibrated data are 32 bit fixed point numbers with 16 integer bits and 16 fractional bits. Any calibrated result covers therefore 1 result register. The serial output begins with the highest bit (215) and ends with the lowest one (2-16). The numbers are available in complements of 2. Time = RES_X * Tref * 2 DIV_CLKHS = RES_X * Tref * N , with N = 1, 2 or 4 Time < 2 * Tref * 2 DIV_CLKHS b. Measurement mode 1 without calibration (CALIBRATE = 0) Non-calibrated data are of the type ‘Signed Integer’ and are stored as a 16 bit value in the high word of the result registers. The bits of the low word are set to zero. The result is represented as number of LSB and is available in complements of 2. Time = RES_X * LSB ~ RES_X * 90 ps c. Measurement mode 2 In measurement mode 2 the TDC-GP21 only supports calibrated measurement. The results are given in multiples of the internal reference clock (= external reference clock divided by 1, 2 or 4 (DIV_CLKHS)). Calibrated data are 32 bit fixed point numbers with 16 integer bits and 16 fractional bits. Any calibrated result covers therefore 1 result register. The serial output begins with the highest bit (215) and ends with the lowest one (2-16). The numbers are available in complements of 2. Time = RES_X * Tref * 2 DIV_CLKHS = RES_X * Tref * N , with N = 1, 2 or 4 Member of the ams Group |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |