| 전자부품 데이터시트 검색엔진 |
|
TDC-GP21 데이터시트(PDF) 41 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
TDC-GP21 데이터시트(HTML) 41 Page - ams AG |
|
41 / 91 page ![]() Ultrasonic-Flow-Converter TDC-GP21 3-16 acam messelectronic gmbh - Friedrich-List-Str.4 - 76297 Stutensee - Germany - www.acam.de 3.4 SPI-interface The serial interface is compatible with the 4-wire SPI standard. It needs the SerialSelectNot (SSN) and can not operated as 3-wire interface. SSN - Slave Select SCK - SPI Clock SI - SPI Data In SO - SPI Data Out The TDC-GP21 does only support the following SPI mode (Motorola specification)*: Clock Phase Bit = 1 Clock Polarity Bit = 0 SCK starts with LOW, data take over is with the falling edge of SCK. The timings are shown in section 2.3. The interrupt pin is set back to INTN = 1 if: SSN goes LOW or, in case SSN is already LOW, with the first rising edge of SCK. SSN as Reset The SerialSelectNot (SSN) line is the HIGH-active reset for the serial interface. After SSN is set to LOW different operations can be addressed, not depending on the status of the interface before the reset. Note: It is mandatory to set the SSN – line to High-state for at least 50 ns between each Read-/Write sequence. * There is no common SPI specification, especially for phase & polarity. Some microcontroller may need a different setting, e.g. MSP430 run with Clock Phase = Clock Polarity = 0 Opcodes Member of the ams Group |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |