| 전자부품 데이터시트 검색엔진 |
|
TDC-GP21 데이터시트(PDF) 53 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
TDC-GP21 데이터시트(HTML) 53 Page - ams AG |
|
53 / 91 page ![]() Ultrasonic-Flow-Converter TDC-GP21 4-8 acam messelectronic gmbh - Friedrich-List-Str.4 - 76297 Stutensee - Germany - www.acam.de complements of 2. Given in multiples of the reference clock. Time = RES_X * Tref * N, with N = 1, 2 or 4 The measured time interval may not exceed otherwise the ALU will go into overflow and will write the data ’hFFFFFFFF to the output register. The configuration of the ALU allows only one hit calculation at the time. In case mor e than one hit has been measured it is necessary to write new commands to HIT1/HIT2 to instruct the ALU for calculating the other hits. After writing to HIT1/HIT2 it is necessary to wait for minimum t.b.d. µs (calibrated data) or t.b.d. ns (un-calibrated data) before reading or writing again to HIT1/HIT2. Reading Calibration Raw Data The calibration data are not addressed directly after the calibration measurement but after the next regular measurement, before the next INIT. At the end the TDC-GP21 has to be initialized again to be ready for the next measurement. This is done by sending the opcode “Init“ so that the TDC accepts new Start and Stop hits. Source Code Example: //-------------------------------------------------------------------------- // 1st Measurement plus calibration data readout gp21_send_1byte(Bus_Type, Init); // Wait for INT Slot_x Wait_For_Interrupt(Bus_Type); // First regular measurement (to readout calibration raw data) Result = gp21_read_n_bytes(Bus_Type, 4 ,0xB0 ,0x00 ,16); // readout the new calibration data from result register adr 0x01 gp21_wr_config_reg(Bus_Type, 0x81, 0x67490000); Diff_Cal2_Cal1 = gp21_read_n_bytes(Bus_Type, 4, 0xB0 ,0x01 ,16); //-------------------------------------------------------------------------- Member of the ams Group |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |