MEC1322 datasheet(309/456 Pages) MICROCHIP

309 / 456 page

 2014 - 2015 Microchip Technology Inc.

DS00001719D-page 309

MEC1322

27.5

Signal Description

27.6

Host Interface

The registers defined for the General Purpose Serial Peripheral Interface are accessible by the various hosts as indi-

cated in Section 27.12, "EC-Only Registers".

27.7

Power, Clocks and Reset

This section defines the Power, Clock, and Reset parameters of the block.

27.7.1

POWER DOMAINS

27.7.2

CLOCK INPUTS

27.7.3

RESETS

TABLE 27-1:

SIGNAL DESCRIPTION TABLE

Name

Direction

Description

SPDIN

Input

Serial Data In pin

SPDOUT

Input/Output

Serial Data Output pin. Switches to input when used in double-data-

rate mode

SPI_CLK

Output

SPI Clock output used to drive the SPCLK pin.

SPI_CS#

Output

SPI chip select

Note:

The SPI block signals that are shown in Table 27-1 are routed to the SPI pins as listed in Table 27-2.

TABLE 27-2:

SIGNAL TO PIN NAME LOOKUP TABLE

Block Name

Pin Name

SPDIN

SHD_MISO, PVT_MISO

SPDOUT

SHD_MOSI, PVT_MOSI

SPI_CLK

SHD_SCLK, PVT_SCLK

SPI_CS#

SHD_CS0#, PVT_CS0#

TABLE 27-3:

POWER SOURCES

Name

Description

VCC1

The logic and registers implemented in this block are powered by this

power well.

TABLE 27-4:

CLOCK INPUTS

Name

Description

48 MHz Ring Oscillator

This is a clock source for the SPI clock generator.

2MHz

This is a clock source for the SPI clock generator.

TABLE 27-5:

RESET SIGNALS

Name

Description

VCC1_RESET

This signal resets all the registers and logic in this block to their default

state.

MEC1322 데이터시트(PDF) 309 Page - Microchip Technology

MEC1322 데이터시트(HTML) 309 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL