MEC1322 datasheet(137/456 Pages) MICROCHIP

137 / 456 page

 2014 - 2015 Microchip Technology Inc.

DS00001719D-page 137

MEC1322

4BURST

The BURST bit is set when the ACPI_EC is in Burst Mode for polled

command processing; the BURST bit is cleared when the ACPI_EC

is in Normal mode for interrupt-driven command processing.

The BURST bit is an ACPI_EC-maintained software flag that indi-

cates the embedded controller has received the Burst Enable com-

mand from the host, has halted normal processing, and is waiting

for a series of commands to be sent from the host. Burst Mode

allows the OS or system management handler to quickly read and

write several bytes of data at a time without the overhead of SCIs

between commands.

The BURST bit is maintained by ACPI_EC software, only.

R0b

VCC1_R

ESET

3CMD

This bit is set when the OS2EC Data EC Byte 0 Register contains a

command byte written into ACPI OS COMMAND Register; this bit is

cleared when the OS2EC DATA BYTES[3:0] contains a data byte

written into the ACPI-OS DATA BYTES[3:0].

This bit is hardware controlled:

• ACPI_OS writes to any of the four ACPI-OS DATA BYTES[3:0]

bytes clears this bit

• ACPI_OS writes to the ACPI OS COMMAND Register sets this

bit.

Note:

This bit allows the embedded controller to differentiate

the start of a command sequence from a data byte write

operation.

R0b

VCC1_R

ESET

2UD1B

User Defined

R0b

VCC1_R

ESET

Offset

04h

Bits

Description

Type

Default

Reset

Event

MEC1322 데이터시트(PDF) 137 Page - Microchip Technology

MEC1322 데이터시트(HTML) 137 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL