DS3134 datasheet(155/203 Pages) DALLAS

155 / 203 page

DS3134

155 of 203

Bits 24 to 31 / Class Code Base Class. These read only bits identify the base class value for the device

and are fixed at 02h, which indicate "Network Controllers".

See Appendix D of PCI Local Bus

Specification Revision 2.1 for details.

PLTH0

0x00Ch

lsb

Cache Line Size

Latency Timer

Header Type (Read Only / set to 80h)

msb

BIST (Read Only / set to 00h)

Bits 0 to 7 / Cache Line Size. These read/write bits indicates the cache line size in terms of dwords. If

the burst size of a data read transaction exceeds this value, then the PCI Block will use the memory read

multiple command. Valid settings are 04h (4 dwords), 08h, 10h, 20h, and 40h (64 dwords). Other

settings are interpreted as 00h. These bits are forced to zero when a hardware reset is initiated via the

PRST* pin.

Bits 8 to 15 / Latency Timer. These read/write bits indicate the value of the Latency Timer (in terms of

the number of PCI clocks) for use when the device is a bus master. These bits are forced to zero when a

hardware reset is initiated via the PRST* pin.

Bits 16 to 23 / Header Type. These read only bits are forced to 80h, which indicate a multifunction

device.

Bits 24 to 31 / Built-In Self-Test (BIST). These read only bits are forced to zero.

PDCM

0x010h

lsb

Base Address (Read Only / set to 0h)

TYPE1

TYPE0

MSI

Base Address

Base Address (Read Only / set to 0h)

Base Address

msb

Base Address

DS3134 데이터시트(PDF) 155 Page - Dallas Semiconductor