| 전자부품 데이터시트 검색엔진 |
|
DS3134 데이터시트(PDF) 39 Page - Dallas Semiconductor |
|
|
|||||||||||||||||||||||||||||
DS3134 데이터시트(HTML) 39 Page - Dallas Semiconductor |
|
39 / 203 page ![]() DS3134 39 of 203 SECTION 4: GENERAL DEVICE CONFIGURATION & STATUS/INTERRUPT 4.1 MASTER RESET & ID REGISTER DESCRIPTION The Master Reset & ID (MRID) register can be used to globally reset the device. When the RST bit is set to one, all of the internal registers (except the PCI configuration registers) will be placed into their default state, which is 0000h. The Host must set the RST bit back to zero before the device can be programmed for normal operation. The RST bit does not force the PCI outputs to tri-state as does the hardware reset which is invoked via the PRST* pin. A reset invoked by the PRST* pin will force the RST bit to zero as well as the rest of the internal configuration registers. See Section 1 for more details on device initialization. The upper byte of the MRID register is read only and it can be read by the Host to determine the chip revision. Contact the factory for specifics on the meaning of the value read from the ID0 to ID7 bits. Register Name: MRID Register Description: Master Reset and ID Register Register Address: 0000h 76 5432 10 n/a n/a n/a n/a n/a n/a n/a RST 15 14 13 12 11 10 9 8 ID7 ID6 ID5 ID4 ID3 ID2 ID1 ID0 Note: Bits that are underlined are read only, all other bits are read-write; default value for all bits is 0. Bit 0 / Master Software Reset (RST). 0 = normal operation 1 = force all internal registers (except LBBMC) to their default value of 0000h Bits 8 to 15 / Chip Revision ID Bit 0 to 7 (ID0 to ID7). Read only. Contact the factory for details on the meaning of the ID bits. 4.2 MASTER CONFIGURATION REGISTER DESCRIPTION The Master Configuration (MC) register is used by the Host to enable the receive and transmit DMAs as well as to control their PCI Bus bursting attributes and to select which port the BERT is to be dedicated to. Register Name: MC Register Description: Master Configuration Register Register Address: 0010h 76 5432 10 BPS0 PBO TDT1 TDT0 TDE RDT1 RDT0 RDE 15 14 13 12 11 10 9 8 TFPC1 TFPC0 RFPC1 RFPC0 BPS4 BPS3 BPS2 BPS1 Note: Bits that are underlined are read only, all other bits are read-write; default value for all bits is 0. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |